274399 XC-CPU101-C256K-8DI-6DO

Delivery program

Digital input count
Digital: 8; of which usable as interrupt: 4
Quantity of outputs
Transistor: 6
Built-in interfaces
CANopen®/easyNet
RS232
Instructions
expandable with → expansions XI/OC
Only on connection with →XI/OC rack
User memory
256 Kbyte
Cycle time for 1 k of instructions (Bit, Byte)
< 0.5 ms
Memory
Application/marker/retain data
256 KB/8 KB/8 KB
Integrated Web server
no
Information about equipment supplied
The following accessory equipment is required: terminal clamps, module rack, battery
Approvals
EAC

Technical data

General
Standards
IEC/EN 61131-2
EN 50178
Ambient temperature
0 - +55 °C
Storage [ϑ]
-25 - +70 °C
Mounting position
Horizontal
Relative humidity, non-condensing (IEC/EN 60068-2-30)
10 - 95 %
Air pressure (operation)
795 - 1080 hPa
Vibration resistance
10 - 57 Hz ±0.075 mm
57 - 150 Hz ±1.0 g
Mechanical shock resistance
15
Shock duration 11 ms g
Overvoltage category/pollution degree
II/2
Degree of Protection
IP20
Rated insulation voltage [Ui ]
500 V
Emitted interference
EN 50081-2, Class A
Interference immunity
EN 50081-2
Battery (service life)
normally 5 years
Weight
0.23 kg
Terminations
Plug-in terminal block
Terminal capacitiesScrew terminalsFlexible with ferrule
0.5 - 1.5 mm2
Terminal capacitiesScrew terminalsSolid
0.5 - 2.5 mm2
Terminal capacitiesSpring-loaded terminalsflexible
0.34 - 1.0 mm2
Terminal capacitiesSpring-loaded terminalsSolid
0.14 - 1.0 mm2
Power supply
Duration of mains dip
10 ms
Repetition rate
1 s
Input voltage
24 V DC
Admissible range
20.4 - 28.8 V DC
Input rating
max. 26 W
Residual ripple
≦ 5 %
Maximum power loss (without local I/O) [Pv]
6 W
Note on heat dissipation
Without local I/O
Overvoltage protection
Yes
Protection against polarity reversal
Yes
Mains filter (external)
Yes
Inrush current
No limitation (limited only by upstream 24 V DC power supply unit) x In
Signal module output voltageRated value
5 V DC
Signal module output voltageOutput current
3.2 A
Signal module output voltageShort-circuit rating
Yes
Signal module output voltageElectrically isolated from the supply voltage
No
CPU
Processor
Infineon C164
Memory
Program code and program data
256/256 kByte
Marker/retentive data
8/8 KByte
Cycle time for 1 k of instructions (Bit, Byte)
< 0.5 ms
Interfaces
Serial interface (RS232) without handshake linesData transfer rate
max. 57.6 kbit/s
Serial interface (RS232) without handshake linesConnection technique
RJ45
Serial interface (RS232) without handshake linesPotential isolation
No
CANopen®Maximum data transfer rate
500000 Bits/s
CANopen®Potential isolation
Yes
CANopen®Device profile
To DS 301 V4
CANopen®PDO type
Asyn., cyc., acyc.
CANopen®Connection
Plug-in terminal block
CANopen®Bus terminating resistors
External
CANopen®Stations
max. 126 Number
Watchdog
Yes
RTC (real-time clock)
Yes
Power supply of local inputs/outputs (24 VQ/0 VQ)
Input voltage
24 V DC
Voltage range
19.2 - 30, note polarity V DC
Potential isolationPower supply against CPU voltage
Yes
Overvoltage protection
Yes
Protection against polarity reversal
Yes
Digital inputs
Input current per channel at nominal voltage
Normally 3.5 mA
Power loss per channel
Normally 85 mW
Voltage level to IEC/EN 61131-2Limit value type 1
Low < 5 V DC, high > 15 V DC
Input delayOff → On
Normally 0.1 ms
Input delayOn → Off
Normally 0.1 ms
Inputs
8 (4 of which are interrupt inputs) Number
Channels with the same reference potential
8 Qty.
Status indication
LED
Digital outputs
Channels
6 Number
Power loss per channel
0.08 W
QX0.0 to QX0.3
0.5 A
Output delayOff → On
Normally 0.1 ms
Output delayOn → Off
Normally 0.1 ms
Channels with the same reference potential
6 Qty.
Status indication
LED
Switching capacity
IEC/EN 60947-5-1, utilization category DC-13
duty factor
100 % DF
Utilization factor
1 g

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
6 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

PLC's (EG000024) / PLC CPU-module (EC000236)
Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS - basic device (ecl@ss10.0.1-27-24-22-07 [AKE530014])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
20.4 - 28.8 V
Voltage type of supply voltage
DC
Number of relay outputs
0
Max. number of time switches
1000
Model
Modular
Processing time (1K, binary operation)
0.5 ms
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
1
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces USB
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces other
1
Number of analogue outputs
0
Number of analogue inputs
0
Number of digital inputs
8
Number of digital outputs
6
With optical interface
No
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
Yes
Supporting protocol for CAN
Yes
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
Yes
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
Yes
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
Yes
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
System accessory
Yes
Redundancy
No
With display
No
Type of memory
RAM
Memory size
256 kByte
Additional program memory possible
Yes
Rail mounting possible
Yes
Wall mounting/direct mounting
Yes
Front build in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
Category according to EN 954-1
SIL according to IEC 61508
None
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
60 mm
Height
100 mm
Depth
100 mm

Approvals

Product Standards
IEC: see Technical Data; UL508; CSA-C22.2 No. 0-M; CSA-C22.2 No. 142-M; CE marking
UL File No.
E135462
UL Category Control No.
NRAQ
CSA File No.
012528
CSA Class No.
2252-01
North America Certification
UL listed, CSA certified
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -

Dimensions

272X121