General specifications
Product name
Eaton Moeller series NZM operating element
Part no.
NZM4-XTVDVR-60
EAN
4015082715151
Product Length/Depth
230 millimetre
Product height
130 millimetre
Product width
230 millimetre
Product weight
1.833 kilogram
Compliances
RoHS conform
IEC
UL/CSA
Certifications
CE marking
CSA (File No. 22086)
UL listed
UL (File No. E140305)
CSA-C22.2 No. 5-09
IEC60947
UL (Category Control Number DIHS)
CSA certified
CSA (Class No. 1437-01)
UL489
Product Tradename
NZM
Product Type
Accessories
Product Sub Type
Operating element
Delivery program
Type
Door coupling rotary handle
Accessory
Number of poles
Single-pole
Features
Red-yellow for emergency switching off
Lockable
Special features
Door coupling rotary handle for operating the switch through a closed control panel door
External warning plate/designation label can be clipped on.
Cannot be combined with NZM...-XDZ additional handle
Without shaft support
For maximum shaft length 60 mm
Extension shaft additionally required.
Complete including rotary drive and coupling parts
Frame
NZM4
Fitted with:
Padlock
Suitable for
Power circuit breaker
Switch disconnector
Emergency stop
Used with
NZM4(-4), N(S)4(-4)
Technical Data - Mechanical
Color
Black
Cover/door type
Door interlock not defeated in the locked OFF position.
Door can be opened in OFF
Door interlock can be modified such that it can be defeated from the outside using a screwdriver
Door interlock can be modified in the unlocked ON position
Degree of protection / NEMA enclosure type
4X. 12
IP66
Lock number
Double lockable
Locking facility
Lockable on the handle on the switch using up to 3 padlocks
With door interlock
Special features
Door coupling rotary handle for operating the switch through a closed control panel door
External warning plate/designation label can be clipped on.
Cannot be combined with NZM...-XDZ additional handle
Without shaft support
For maximum shaft length 60 mm
Extension shaft additionally required.
Complete including rotary drive and coupling parts
Design verification as per IEC/EN 61439
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 9.0

Low-voltage industrial components (EG000017) / Handle for power circuit breaker (EC000229)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Handle for switch devices (ecl@ss13-27-37-04-14 [AKF012019])
With restart blockage
No
With key lock
No
Padlock locking
Yes
Colour
Black
Suitable for emergency stop
Yes
With extension shaft
No
Suitable for power circuit breaker
Yes
Suitable for switch disconnector
Yes
Degree of protection (NEMA)
4X, 12