Design verification as per IEC/EN 61439

Rated operational current for specified heat dissipation [In]
40 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
8.6 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-40 °C
Operating ambient temperature max.
+60 °C
0

Technical data ETIM 7.0

Devices for distribution board-/surface mounting (EG000062) / Installation contactor for distribution board (EC001653)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Installation contactor for distribution board (ecl@ss10.0.1-27-14-23-08 [AFZ820015])
Rated operating voltage
440 - 440 V
Rated operation current
40 A
Utility category
1
Rated excitation voltage
230 - 230 V
Voltage type (operating voltage)
AC
Voltage type (excitation voltage)
AC
Number of contacts as normally open contact
2
Number of contacts as normally closed contact
2
Max. incandescent lamp load
5520 W
Max. load fluorescent lamp
2610 VA
Max. load fluorescent lamp (Duo circuit)
5336 VA
Max. load fluorescent lamp (parallel compensated)
2088 VA
Slider for hand switch
No
Number of modular spacings
3
Built-in depth
60 mm
Additional equipment possible
Yes
Degree of protection (IP)
IP40