Design verification as per IEC/EN 61439

Rated operational current for specified heat dissipation [In]
40 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
14.6 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-40 °C
Operating ambient temperature max.
+60 °C
0

Technical data ETIM 8.0

Devices for distribution board-/surface mounting (EG000062) / Installation contactor for distribution board (EC001653)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Installation contactor for distribution board (ecl@ss10.0.1-27-14-23-08 [AFZ820015])
Rated operating voltage
440 - 440 V
Rated operation current
40 A
Utility category
1
Rated excitation voltage
195.5 - 253 V
Voltage type (operating voltage)
AC
Voltage type (excitation voltage)
AC
Number of contacts as normally open contact
4
Number of contacts as normally closed contact
0
Max. incandescent lamp load
5520 W
Max. load fluorescent lamp
2610 VA
Max. load fluorescent lamp (Duo circuit)
5336 VA
Max. load fluorescent lamp (parallel compensated)
2088 VA
Slider for hand switch
No
Width in number of modular spacings
3
Built-in depth
60 mm
Additional equipment possible
Yes
With day/night function
No
Hum-free
No
Degree of protection (IP)
IP40