Delivery program

Basic function
Accessories for residual current circuit-breakers
Basic function accessories
Auxiliary contacts
Application
Switchgear for industrial and advanced commercial applications
Product range
Accessory
Side mounting
for fitting on left to: FI

Technical data

Technical data
ElectricalContact function
1 NO + 1 NC
ElectricalRated operational voltage [Ue]
250 V AC
ElectricalRated frequency [f]
50/60 Hz
ElectricalRated current [Ie ]
8 A
ElectricalConventional free air thermal current [Ith]
8 A
ElectricalRated operational currentAC--13250 V [Ie ]
6 A
ElectricalRated operational currentDC-13 [Ie]
2 (110V DC) A
ElectricalMinimum operating voltage per contact [Umin]
24 V DC
ElectricalRated impulse withstand voltage [Uimp]
2.5 kV
MechanicalMounting width
8.8 (0.5 SU) mm
MechanicalDegree of protectionIntegrated
IP40
MechanicalTerminals
Lift terminals
MechanicalTightening torque of terminal screws
≦ 1.0 Nm
Standards
EN 45545-2; IEC 61373

Design verification as per IEC/EN 61439

Operating ambient temperature min.
-5 °C
Operating ambient temperature max.
+40 °C

Technical data ETIM 8.0

Devices for distribution board-/surface mounting (EG000062) / Auxiliary device for distribution board devices (EC001286)
Electric engineering, automation, process control engineering / Electrical installation, device / Breaker switch component / Auxiliary contact unit for distribution board (ecl@ss10.0.1-27-14-35-02 [AKE327013])
Device fitting
Earth leakage switch
Additional equipment
Auxiliary switch
Installed at the factory
No
Width in number of modular spacings
0.5
Number of contacts as normally open contact
1
Number of contacts as normally closed contact
1
Number of contacts as change-over contact
0
Number of fault-signal switches
0
Rated switch current
3 A
Rated voltage
230 V
Voltage type for actuating
AC
With auto test for earth leakage function
No
Suitable for max. number of poles main contact unit (total)
2
Suitable for max. current main contact unit
8 A