248345 Z-S/WM
Two way switchp11 CO, 16A, 230 V, 20kA
Changeover switch, function: 1W, I-O-II, rated operational current 16A, rated operating voltage 230/400V AC, short-circuit strength 10kA, standard front dimension 45 mm, mounting width 1 SU (17.5mm), top-hat rail mounting, terminal cross-section 1-10 mm², type conform to IEC 60669, VDE 0632
Design verification as per IEC/EN 61439
Rated operational current for specified heat dissipation [In]
20 A
Technical data ETIM 7.0
Devices for distribution board-/surface mounting (EG000062) / Main switch for distribution board (EC001545)
Electric engineering, automation, process control engineering / Electrical installation, device / Modular serial built-in device for electrical circuit distributors / Main switch for distribution board (ecl@ss10.0.1-27-14-23-01 [AFZ813014])
Switching function
Two-way switch
Number of contacts as normally open contact
0
Number of contacts as normally closed contact
0
Number of contacts as change-over contact
1
Number of poles
1
Rated current
20 A
Rated voltage
240 V
Min. rated voltage
0 V
Rated switching capacity
0.025 kA
Short-circuit breaking capacity (Icw)
10 kA
Voltage type
AC
With signal lamp
No
Colour calotte
Other
Lamp type
Other
Lamp socket
Other
Max. lamp power
0 W
Width in number of modular spacings
1
Built-in depth
80 mm
Degree of protection (IP)
IP40
Imprint/indication
EV000154
-
Asset
-
Asset
-
Eaton EMEA Download-Center - download data for this item
-
Eaton EMEA Download-Center