General specifications
Product name
Eaton Moeller® series CI-K Accessory Insulated enclosure
Part no.
CI-K2-PKZ0-GR
EAN
4015082196554
Product Length/Depth
132 millimetre
Product height
180 millimetre
Product width
100 millimetre
Product weight
0.415 kilogram
Compliances
Contact Manufacturer
Certifications
CE
Product Tradename
CI-K
Product Type
Accessory
Product Sub Type
Insulated enclosure
Catalog Notes
Additional cable insertion membrane as cable entry gland: 2 x in the rear wall and 1 x at the bottom.
Features & Functions
Enclosure material
Plastic
Fitted with:
N and PE terminal
Red-yellow rotary knob, for use as EMERGENCY STOP switch (according to EN 60204)
Knockouts
2 x M25 (cable entry knockout at the top)
2 x M25 (cable entry knockout at the bottom)
General information
Degree of protection
NEMA Other
IP65
Model
Surface mounting
Product category
Accessories
Suitable for
Emergency stop
Used with
+L-PKZ0 (2 units), +NHI or AGM, +U or A, PKZM0-…
PKZ0
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
70 °C
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
12.5 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
0 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 9.0

Low-voltage industrial components (EG000017) / Carcasa vacía para aparamenta (EC000712)
Tecnología electrónica, de automatización y de mando de procesos / Tecnología de conmutación de baja tensión / Componente para tecnología de conmutación de baja tensión / Caja vacía para unidad de conmutación (ecl@ss13-27-37-13-01 [AKN343019])
Housing material
Plastic
Width
100 mm
Height
180 mm
Depth
132 mm
With transparent cover
No
Suitable for emergency stop
Yes
Model
Surface mounting
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other