193911 CRCA-00/12
Room Controller Touch, signal white, gloss, with Universal firmware for Bridge
EL Number (Norway)
4560753
Room Controller Touch, signal white gloss, with temperature and humidity sensor is suitable to monitor and control the climate in a room either stand-a-lone or together with an intelligent device. The operation is done through the Touch display with backlight. The user programmable Week Program Timer and 4 Operation modes offer maximum flexibility to meet the specific needs. It supports floor temperature control via an optional external wired floor temperature sensor (PT1000). Two optional touch-buttons on the display are available to control other xComfort functions/actuators. The Room Controller Touch is compatible with many 55 mm frames from the switch industry (observe the compatibility list). The device is battery powered and NO switch, branch or installation box is required, therefore it can be easily mounted anywhere (screwed and glued). Battery included as standard, but it can also be powered with an optional mains power adapter. Important! This Room Controller Touch is pre-programmed with the Universal software that works with the xComfort Bridge and Heating actuator.
General specifications
Product name
Eaton Moeller series xComfort - Controllers
Part no.
CRCA-00/12
EAN
9010238040267
Product Length/Depth
55 millimetre
Product height
21 millimetre
Product width
55 millimetre
Product weight
0.055 kilogram
Compliances
RoHS conform
Product Tradename
xComfort
Product Type
Controllers
Product Sub Type
None
Delivery program
Sensor type
Temperature
Humidity
Humidity
Color
White
Signal white
Signal white
Bus system operating type
xComfort
Radio frequent
Radio frequent
Bus system product type
Sensor, Controller
Technical Data - Electrical
Power supply
Battery
Standby power consumption (solstandby)
0.05 W
Technical Data - Mechanical
Built-in installation box depth - min
0 mm
Assembly arrangement
Basic element with complete housing
Material
Plastic
Material quality
Thermoplastic
Surface finishing
Glossy
Surface protection
Untreated
Mounting method
Surface mounted (plaster)
Surface mounting
Surface mounting
Number of inputs (binary)
0
Class (temperature control)
IV
Degree of protection
IP20
Additional information
Features
Radio frequent bidirectional
Fitted with:
Display
External sensor
Local operation
External sensor
Local operation
Functions
Manual set point setting
Parallel-service possible
Parallel-service possible
RAL-number (Akin)
9003
Used with
55 mm (Universal) pushbutton
Technical data ETIM 8.0
Installation bus systems (EG000032) / Room temperature controller for bus system (EC001101)
Electric engineering, automation, process control engineering / Electrical installation, device / Bus system / Bus system room temperature controller (ecl@ss10.0.1-27-14-31-33 [AKE301014])
Bus system KNX
No
Bus system KNX radio
No
Bus system radio frequent
Yes
Bus system LON
No
Bus system Powernet
No
Other bus systems
xComfort
Radio frequent bidirectional
Yes
Assembly arrangement
Basic element with complete housing
Mounting method
Surface mounted (plaster)
With local operation
Yes
With anti-theft/dismantling protection
No
With LED indication
No
With display
Yes
Number of digital inputs
0
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Colour
White
RAL-number (similar)
9,003
Transparent
No
External sensor
Yes
Manual set point setting
Yes
Presence button
No
Parallel-service possible
Yes
Degree of protection (IP)
IP20
With bus connection
No
Class of the temperature control
IV
Standby power consumption (solstandby)
0.05 W
Min. depth of built-in installation box
0 mm
-
Photo
-
Asset
-
Asset
-
Eaton EMEA Download-Center - download data for this item
-
Eaton EMEA Download-Center