Delivery program

Accessories
Terminations
Push-in socket connector for wiring the relay module (230 VAC) from the XN300 I/O system XN-322-4DO-RNO
For use with
XN-312-…

Technical data

Terminal capacities
Flexible with ferrule
1,5 mm2

Design verification as per IEC/EN 61439

Technical data for design verification
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply to plastic enclosures.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Installation, isolation and connection material (EG000047) / Screw less terminal (EC000446)
Electric engineering, automation, process control engineering / Electrical installation, device / Terminal (not overhead line) / Screw less terminal (ecl@ss10.0.1-27-14-11-04 [AAB919014])
Number of clamp positions
Nominal cross section
mm²
Cable diameter
mm
With operation lever
Colour
Nominal voltage
V
Nominal current
A
Suitable for solid core
Suitable for flexible core
Suitable for multi-wire core
Conductor cross section flexible (fine-strand) with cable end sleeve
mm²
Conductor cross section solid (solid, stranded)
mm²
AWG-range

Approvals

Specially designed for North America
No
Current Limiting Circuit-Breaker
No