Datasheet - XC-303-C11-000

German
English
French
Dutch
Italian
Polish
Czech
Russian
Norwegian Bokmål
English

 
XC303 modular PLC, small PLC, programmable CODESYS 3, SD Slot, Ethernet, CAN
Part no.  XC-303-C11-000
Catalog No.  191082
Eaton Catalog No.  XC-303-C11-000
 
Similar to illustration
 

Delivery program
Approvals
    CE, in preparation: cULus
certificate
    CE
Connection design in TOP direction
    Push-in spring-cage terminal
Technical data
General
Standards
    EN 61131
Electromagnetic compatibility (EMC)
     
ESD
Air/contact discharge kV 8 / 4
Electromagnetic fields
(0.08…1) / (1,4…2) / (2…2,7) GHz V/m 10 / 3 / 1
Burst
     
Supply cable
  kV 2
Signal cable
  kV 1
Surge
     
Supply cable (balanced / unbalanced)
  kV 0,5 / 0,5
Signal cable (unbalanced)
  kV 1
Radiated RFI
  V 10
Emitted interference (radiated, high frequency)
(30...230 MHz) / (230...1000 MHz) dB 40 / 47 class A
Voltage fluctuations/voltage dips
    Yes / 20 ms
Ambient conditions
     
Climatic conditions
     
Climatic proofing
    Dry heat to IEC 60068-2-2
Damp heat as per EN 60068-2-3
Air pressure (operation)
  hPa 795 - 1080
Relative humidity
    < 95%, non-condensing
Condensation
    prevent with suitable measures
Temperature
     
Operation
  °C -25 - +55
Storage, transport
ϑ °C -25 - +80
Degree of Protection
    IP20
Mounting position
    Vertical (on horizontal top-hat rail)
Free fall, packaged (IEC/EN 60068-2-32)
  m 1
Vibrations
3,5 mm / 1 g Hz 5 - 8.4 / 8.4 -150
Mechanical shock resistance
Semisinusoidal 15 g/11 ms Impacts 9
Terminations
Rated operational data
     
Insulating material group
    I
Overvoltage category / pollution degree
    II / 2
Rated operating voltage
  V 160
Maximum load current/cross-sectional area
  A / mm² 6/1.5
Connection design in TOP direction
    Push-in spring-cage terminal
Stripping length
  mm 10
Gauge pin IEC/EN 60947-1
    A1
Connection specifications
     
"e" solid H07V-U
  mm2 0.2 - 1.5
"f" flexible H 07V-K
  mm2 0.2 - 1.5
"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
  mm2 0.25-1.5
"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
  mm2 0.25-1.5
Cable size
  AWG 24 - 16
Supply
Power supply - Input
     
Power supply
     
Rated operating voltage
Ue V 24
Rated operational current
Ie A 2.8
Potential isolation
PE (polyethylene)   No
Heat dissipation
     
Max. heat dissipation
  W 8
Notes on heat dissipation
    The max. heat dissipation is specified as the maximum power produced inside the device's housing.
Digital inputs
Channels
  Number 4 (interruptfähig)
Input voltage
     
Nominal input voltage
Ue V DC 24
Low level
UeL V 0 < UeL < +5
High level
UeH V +15 < UeH < +30
Input current
     
Input current, nominal value
Ie mA 2
Low level⁄active level
IeL mA ≤1.1
High level⁄active level
IeH mA ≥2.3
Input delay
     
tRising edge
  µs < 300
tFalling edge
  µs < 300
Potential isolation
  Input to input No
Heat dissipation (per active channel)
  W 0.05 inputs as per EN61131-2 Type 1; inputs can also be operated as outputs
Digital outputs
Channels
  Quantity 4
Output current
  A  
Output current, nominal value
IaL A 0.5
Short-circuit rating
    Yes
Potential isolation
  Output against output No
Heat dissipation (internal, per active channel)
  W 0.1
Utilization factor
% g 100% (Ʃ IAmax = 2A)
Delay on signal change and resistive load
     
from Low to High level
  µs 200
From High to Low signal
  µs 200
Notes on digital outputs
    Protective devices must be installed directly at the inductive load in order to prevent interference.
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data ETIM 7.0(Show features)(Hide features)
Approvals
North America Certification     Request filed for cULus
Specially designed for North America     No
Current Limiting Circuit-Breaker     No
Dimensions
108.7 mm (4.28") x 54.3 mm (2.13") x 80.3 mm (3.16")