General specifications
Product name
Eaton DX Radio interference suppression filter - low
Part no.
DX-EMC34-048-FS4-L
EAN
4015081710645
Product Length/Depth
240 millimetre
Product height
500 millimetre
Product width
110 millimetre
Product weight
6.3 kilogram
Certifications
EN 50178
IEC/EN 61800-3
Product Tradename
DX
Product Type
Accessory
Product Sub Type
Radio interference suppression filter - low
Catalog Notes
low leakage current
Features & Functions
Number of phases
3
General information
Accessory/spare part type
Filter
Degree of protection
IP20
IP00
IP20, when connected
Product Category
Accessories
Used with
DA1
DC1
DG1
DM1
Climatic environmental conditions
Altitude
Max. 2000 m
At higher altitudes observe derating
Connection
Connection type
Connection terminal, PE stud, prefabricated cables
Electrical rating
Rated operational current (Ie) - max
48 A
Design verification
Rated operational current for specified heat dissipation (In)
48 A
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.