General specifications
Product name
Eaton XC Compact PLC
Part no.
XC-152-E6-11
EAN
4015081644261
Product Length/Depth
50.6 millimetre
Product height
102.6 millimetre
Product width
155 millimetre
Product weight
0.317 kilogram
Certifications
CSA File No.: UL report applies to both US and Canada
UL Category Control No.: NRAQ
CE
CSA Class No.: none
EN 61131
DNV GL
UL508
Certified by UL for use in Canada
CULus
UL File No.: E205091
UL
IEC/EN 61131-2, CE
UL 508
Product Tradename
XC
Product Type
Compact PLC
Product Sub Type
None
Catalog Notes
CoDeSys Runtime (license inclusive)
Features & Functions
Features
Integrated Web server
Fitted with:
Other components
Libraries
Programming interface
Documentation
Memory unit
Basic device
Engineering software
Communication module
Function module
Real time clock
Power supply
Visualization
Technology module
Functions
Remote Server
Additional field bus interfaces
Web-server
OPC Server
SmartWire-DT master interface
Ethernet function
Building blocks
Processor
RISC CPU, 32 Bit, 400 MHz
General information
Battery runtime
10 years typ.
Degree of protection
IP20
Memory capacity
64 MegaByte/4 kByte/32 kByte (Application/marker/retain data)
Operating system
Windows CE 5.0 (license included)
Power loss
Max. 8.5 W
Product category
SmartWire-DT coordinators
Rated operational voltage
20.4 - 28.8 V DC
Supply voltage at DC - max
24 V DC
Climatic environmental conditions
Ambient operating temperature - min
0 °C
Ambient operating temperature - max
55 °C
Ambient storage temperature - min
-20 °C
Ambient storage temperature - max
60 °C
Communication
Connection to SmartWire-DT
Yes
Connection type
Ethernet: RJ45 plug, 8-pole
RS485: SUB-D, 9-pole (plug)
SWD: Blade terminal SWD4-8MF2
CAN: 9-pole SUB-D (plug)
Cycle time
< 0.04 ms, for 1 k of instructions (Bit, Byte), memory
Data transfer rate
1000 kBit/s, CAN
10Base-T, Ethernet
57.6 kBit/s, RS485
100Base-TX, Ethernet
250 kBit/s, SmartWire-DT
Interfaces
1 x CANopen®/easyNet (built-in)
1 x Ethernet 10/100 Mbps (built-in)
1 x USB host 2.0 (built-in)
USB 2.0
USB 2.0 (Host)
CAN
RS485
1 x USB device 2.0 (built-in)
1 x RS485 (built-in)
1 x SmartWire-DT (built-in)
Memory
64 MByte Program memory code
Number of modules
99 (SmartWire-DT)
127 (CAN)
Number of slots
1 (for SD-Card)
Protocol
SMTP (basic interface)
CANopen® (additional interface)
HTTP (basic interface)
SmartWire-DT (additional interface)
FTP (basic interface)
TCP (basic interface)
IP (basic interface)
easyNet - Master/Device (additional interface)
UDP (basic interface)
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
6 W
Heat dissipation details
6 W for basic device + 2.5 W for USB module
With power consumption for 24 V
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 9.0

Programmable logic controllers PLC (EG000024) / PLC device set (EC002581)
Electric engineering, automation, process control engineering / Control, Process Control System (PCS) / Programmable logic control (SPS) / PLC device set (ecl@ss13-27-24-22-19 [BAA707018])
Contains function building blocks
Yes
Contains basic device
Yes
Contains module rack
No
Contains power supply
Yes
Contains analogue input module
No
Contains analogue output module
No
Contains digital input module
No
Contains digital output module
No
Contains function module
Yes
Contains technology module
Yes
Contains communication module
Yes
Contains memory unit
Yes
Contains simulation module
No
Contains connection cable
No
Contains control unit
No
Contains monitor
No
Contains programming software
No
Contains engineering software
Yes
Contains visualization
Yes
Contains libraries
Yes
Contains documentation
Yes
Contains other components
Yes
Software preinstalled
No