Delivery program

Product range
XV100 5.7"
Product range
XV-102
Function
HMI-PLC (SPS function, retrofittable)
Common features of the model series
Ethernet interface
USB device
USB Host
Slot for SD card
UL508, cUL approvals
Display - Type
Color display, TFT
Touch-technology
Resistive-Touch
Number of colours
64 k Colours
Resolution
VGA
640 x 480 Pixel
Portrait format
yes
Screen diagonal
5.7 Inch
Model
Insulating enclosure and front plate
Operating system
Windows CE 5.0 (licence incl.)
PLC-licence
Can be fitted by user with article no. 142581 LIC-PLC-MXP-COMPACT
License certificates for onboard interfaces
Can be expanded as required, see Accessories -> License product certificates
built-in interfaces
1 x Ethernet 10/100 Mbps
1 x USB device
1 x RS232
1 x RS485
1 x USB host 2.0
Front type
Standard front with standard membrane (fully enclosed)
Utilization
Flush mounting
Slots
for SD card: 1
Memory card automation
Optionally with SD card -> article no. 139807
Pluggable communication cards (optional)
no
Touch sensor
Glass with film
Heat dissipation
9.5 W

Technical data

Display
Display - Type
Color display, TFT
Screen diagonal
5.7 Inch
Resolution
VGA
640 x 480 Pixel
Number of colours
64 k Colours
Contrast ratio (Normally)
Normally 300:1
Brightness
Normally 250 cd/m2
Back-lighting
LED
dimmable via software
Service life of back-lighting
Normally 40000 h
Resistive touch protective screen
Touch sensor (glass with foil)
Operation
Technology
Resistive-Touch
4 wire
Touch sensor
Glass with film
System
Processor
RISC CPU, 32 Bit, 400 MHz
Internal memory
DRAM (OS, Program and data memory): 64 MByte
NAND-Flash (can be used for data backup): approx. 128 MByte available
NVRAM (retained data): approx. 32 KByte available
External memory
SD Memory Card Slot: SDA Specification 1.00
Cooling
Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clockBattery (service life)
non-replaceable, CR2032 soldered in
Back-up of real-time clockBackup (time at zero voltage)
Normally 10 years
Operating system
Windows CE 5.0 (licence incl.)
Engineering
Visualisation software
GALILEO
EPAM
XSOFT-CODESYS-2
XSOFT-CODESYS-3
PLC-Programming software
XSOFT-CODESYS-2
XSOFT-CODESYS-3
Interfaces, communication
built-in interfaces
1 x Ethernet 10/100 Mbps
1 x USB device
1 x RS232
1 x RS485
1 x USB host 2.0
PLC-licence
Can be fitted by user with article no. 142581 LIC-PLC-MXP-COMPACT
USB Host
USB 2.0 (1.5 - 12 Mbit/s), not galvanically isolated
USB device
USB 2.0, not galvanically isolated
Slots
for SD card: 1
Ethernet
100Base-TX/10Base-T
Power supply
Nominal voltage
24 V DC SELV (safety extra low voltage)
permissible voltage
Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%)
Absolute with ripple: 18,0-31,2 V DC
Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%)
35 V DC for a duration of < 100 ms
Voltage dips
≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC) ms
Power consumption [Pmax.]
10 W
Note on power consumption
Basic device
USB Slave to USB Host: 2.5
Total: 9.5
Heat dissipation
9.5 W
Note on heat dissipation
Heat dissipation with power consumption for 24 V
7 W for basic device + 2.5 W for USB module
Siemens MPI, (optional)
yes
Type of fuse
Yes (fuse not accessible)
Potential isolation
no potential isolation
General
Housing material
Plastic, gray
Front type
Standard front with standard membrane (fully enclosed)
Dimensions (W x H x D)
170 x 130 x 39 mm
flush mounted
Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Degree of protection (IEC/EN 60529, EN50178, VBG 4)
IP65 (at front), IP20 (at rear)
ApprovalsApprovals
cUL (UL508)
EAC
ApprovalsExplosion protection (according to ATEX 94/9/EC)
II 3D Ex II T70°C IP5x: Zone 22, Category 3D
Approvalsshipping classification
DNV GL
Approvals
0000SPC-637
Applied standards and directivesEMC
(in relation to CE)
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Applied standards and directivesProduct standards
EN 50178
EN 61131-2
Applied standards and directivesSecurity
EN 60950
UL 60950
Mechanical shock resistance
according to IEC 60068-2-27 g
Vibration
according to IEC/EN 60068-2-6
RoHS
conform
Environmental conditions
TemperatureOperation [ϑ]
0 - +50 °C
TemperatureOperating ambient temperature min.
0 °C
TemperatureOperating ambient temperature max.
+50 °C
Supply voltage UAux
Rated operational voltage [UAux]
24 V DC (-20/+25%) V
Protection against polarity reversal
Yes
Potential isolation
No
Supply voltage UPow
Supply voltage [UPow]
24 DC -20 % + 25 % V
Siemens MPI, (optional)
yes

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
9.5 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+50 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

PLC's (EG000024) / Graphic panel (EC001412)
Electric engineering, automation, process control engineering / Display and control component / Panel (HMI) / Graphic panel (HMI) (ecl@ss10.0.1-27-33-02-01 [AFX016003])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
20.4 - 28.8 V
Voltage type of supply voltage
DC
Voltage type of supply voltage
DC
Number of HW-interfaces industrial Ethernet
1
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
1
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
1
Number of HW-interfaces serial TTY
0
Number of HW-interfaces USB
2
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces other
0
With SW interfaces
Yes
Supporting protocol for TCP/IP
Yes
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
Yes
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
Yes
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
Yes
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
Type of display
TFT
With colour display
Yes
Number of colours of the display
65536
Number of grey-scales/blue-scales of display
0
Screen diagonal
5.7 inch
Number of pixels, horizontal
640
Number of pixels, vertical
480
Useful project memory/user memory
64000 kByte
With numeric keyboard
Yes
With alpha numeric keyboard
Yes
Number of function buttons, programmable
0
Number of buttons with LED
0
Number of system buttons
1
Touch technology
Resistive touch
With message indication
Yes
With message system (incl. buffer and confirmation)
Yes
Process value representation (output) possible
Yes
Process default value (input) possible
Yes
With recipes
Yes
Number of password levels
200
With printer output
Yes
Number of online languages
100
Additional software components, loadable
Yes
Degree of protection (IP), front side
IP65
Degree of protection (NEMA), front side
4X
Operation temperature
0 - 50 °C
Rail mounting possible
No
Wall mounting/direct mounting
No
Suitable for safety functions
No
Width of the front
170 mm
Height of the front
130 mm
Built-in depth
34 mm

Approvals

Product Standards
UL508, cULus; IEC/EN 61131-2, CE
UL File No.
E205091
UL Category Control No.
NRAQ
CSA File No.
UL report applies to US and Canada
CSA Class No.
-
North America Certification
UL listed, certified by UL for use in Canada
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC:IP20, UL/CSA Tape: open type