Delivery program

Function
XI/ON slice card base modules
Connection levels
3 connection levels
Connection technique
Spring-loaded terminals
Function
for Slice module
For use with
XN-2DI-24VDC-P
XN-2DI-24VDC-N
XN-2DI-120/230VAC
XN-1AI-I(0/4...20MA)
XN-2AI-I(0/4...20MA)
XN-1AI-U(-10/0...+10VDC)
XN-2AI-U(-10/0...+10VDC)
XN-2AI-PT/NI-2/3
XN-1AO-I(0/4...20MA)
XN-2AO-I(0/4...20MA)
XN-2AO-U(-10/0...+10VDC)

Technical data

General
Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperature
0 - +55 °C
Relative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Harmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Degree of Protection
IP20
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Approvals
CE, cUL (where required in process)
Other technical data (sheet catalogue)
Terminations
Rated data
according to VDE 0611 Part 1/8.92 /

IEC/EN 60947-7-1
Connection design in TOP direction
Spring-loaded/screw terminal
Stripping length
8 mm
Clamping range
max. 0.5 - 2.5 mm2
Connectable conductors"e" solid H07V-U
0.5 - 2.5 mm2
Connectable conductors"f" flexible H 07V-K
0.5 - 1.5 mm2
Connectable conductors"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.5 - 1.5 mm2
Connectable conductors"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.5 - 1.5 mm2
Gauge pin IEC/EN 60947-1
A1

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

PLC's (EG000024) / Fieldbus, decentr. periphery - mounting frame (EC001598)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - module carrier (ecl@ss10.0.1-27-24-26-03 [BAA064013])
With integrated power supply
Yes
Input voltage at AC 50 Hz
0 - 0 V
Input voltage at AC 60 Hz
0 - 0 V
Input voltage at DC
0 - 0 V
Type of voltage (input voltage)
DC
Max. input current AC 50 Hz
0 A
Max. input current AC 60 Hz
0 A
Max. input current DC
0 A
Output voltage at AC 50 Hz
0 - 0 V
Output voltage at AC 60 Hz
0 - 0 V
Output voltage at DC
0 - 0 V
Type of output voltage
DC
Max. output current AC 50 Hz
0 A
Max. output current AC 60 Hz
0 A
Max. output current DC
0 A
System accessory
Yes
Number of slots
1
With pluggable modules, digital I/O
Yes
With pluggable modules, analogue I/O
Yes
With pluggable modules, communication modules
No
With pluggable modules, function and technology modules
No
With pluggable modules, central modules
Yes
With pluggable modules, others
No
Rail mounting possible
Yes
Wall mounting/direct mounting
No
Front build in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
Category according to EN 954-1
SIL according to IEC 61508
None
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
12.6 mm
Height
154.5 mm
Depth
49.9 mm

Approvals

Product Standards
UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
UL File No.
E205091
UL Category Control No.
NRAQ, NRAQ7
CSA File No.
UL report applies to both US and Canada
CSA Class No.
2252-01, 2252-81
North America Certification
UL recognized, certified by UL for use in Canada
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -

Dimensions

272X003