Delivery program

Function
I/O modules
Digital input modules
Function
XNE Slice module
Short Description
16 Digital inputs, 24 V DC
Positive switching

Technical data

General
Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Approvals
CE, cULus
Other technical data (sheet catalogue)
Terminations
Rated data
according to VDE 0611 Part 1/8.92 /

IEC/EN 60947-7-1
Connection design in TOP direction
Push-In spring-cage terminals
Stripping length
8 mm
Clamping range
max. 0.14 - 1.5 mm2
Connectable conductors"e" solid H07V-U
0.25 - 1.5 mm2
Connectable conductors"f" flexible H 07V-K
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 0.75 mm2
Connectable conductors"e" solid H07V-U
0.25 - 1.5 mm2
Connectable conductors"f" flexible H 07V-K
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 1.5 mm2
Connectable conductors"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
0.25 - 0.75 mm2
Gauge pin IEC/EN 60947-1
A1
Analog input modules
Channels
16 Number
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Heat dissipation
< 2.5 W
Base moduleswithout C connection
Already built in
Analog output modules
Channels
16 Number
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Heat dissipation
< 2.5 W
Base moduleswithout C connection
Already built in
Digital outputs
Channels
16 Number
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Digital inputs
Channels
16 Number
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Rated insulation voltage [Ui]
500 V AC
Heat dissipation
< 2.5 W
Input voltageNominal input voltage [Ue]
24 V DC V DC
Input voltageLow level [UeL]
-UL - +5 V V
Input voltageHigh level [UeH]
11 - 30 V V
Input currentLow level⁄active level [IeL]
-1 mA - 1.5 mA mA
Input currentHigh level⁄active level [IeH]
2 mA - 5 mA mA
Input delaytRising edge
< 150 µs
Input delaytFalling edge
< 300 µs
Base moduleswithout C connection
Already built in
Relay modules
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Base moduleswithout C connection
Already built in
Power supply module
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Counter module
Channels
16 Number
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Heat dissipation
< 2.5 W
Digital inputs
Input voltageNominal input voltage [Ue]
24 V DC V DC
Input voltageLow level [UeL]
-UL - +5 V V
Input voltageHigh level [UeH]
11 - 30 V V
Input currentLow level [IeL]
-1 mA - 1.5 mA mA
Input currentHigh level [IeH]
2 mA - 5 mA mA
Interfaces
Rated voltage through supply terminal [UL ]
24 V DC
Rated current consumption from supply terminal [IL ]
3 mA
Rated current consumption from module bus [IMB ]
≦ 15 mA
Notes

The supply terminal (UL) supplies power for the card's electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents.

Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL).

Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
2.5 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 8.0

Programmable logic controllers PLC (EG000024) / Fieldbus, decentr. periphery - digital I/O module (EC001599)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - digital I/O module (ecl@ss10.0.1-27-24-26-04 [BAA055014])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
18 - 30 V
Voltage type of supply voltage
DC
Number of digital inputs
16
Number of digital outputs
0
Digital inputs configurable
No
Digital outputs configurable
No
Input current at signal 1
2 mA
Permitted voltage at input
0 - 30 V
Type of voltage (input voltage)
DC
Type of digital output
None
Output current
0 A
Permitted voltage at output
0 - 0 V
Type of output voltage
DC
Short-circuit protection, outputs available
No
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces USB
0
Number of HW-interfaces other
1
With optical interface
No
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for Modbus
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
No
Radio standard Wi-Fi 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
System accessory
Yes
Degree of protection (IP)
IP20
Type of electric connection
Plug-in connection
Time delay at signal exchange
0.1 - 0.3 ms
Fieldbus connection over separate bus coupler possible
Yes
Rail mounting possible
Yes
Wall mounting/direct mounting
No
Front built-in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
SIL according to IEC 61508
None
Performance level according to EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
13 mm
Height
74.5 mm
Depth
161.5 mm

Approvals

Product Standards
UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
UL File No.
E205091
UL Category Control No.
NRAQ, NRAQ7
CSA File No.
UL report applies to both US and Canada
CSA Class No.
2252-01, 2252-81
North America Certification
UL recognized, certified by UL for use in Canada
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -

Dimensions

2725DIM-2
Link to sheet catalogue