116025 SWD4-CRP-1
Crimping tool for SWD external device plug SWD4-8SF2-5
EL-Nummer (Norway)
4519797
Tool for the professional fixing of external device plugs SWD4-8SF2-5 to the SWD ribbon cable
Delivery program
Product range
SmartWire-DT accessories
Accessories
Tools for plugs
Function
Crimping tool to install external device plug SWD4-8SF2-5 on SmartWire-DT ribbon cable
Connection to SmartWire-DT
yes
For use with
M22-SWD…
DIL-SWD…
DIL-SWD…
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 8.0
Tools (Press, cut and isolate) (EG000052) / Special tool for telecommunication technology (EC000385)
Manufacturing facility, workshop equipment, tool / Hand tool / Hand tool (other) / Hand tool (other, unspecified) (ecl@ss10.0.1-21-04-90-90 [AKN665013])
Suitable for BNC plug
No
Suitable for D-Sub plug
No
Suitable for F-compression plug
No
Suitable for F plug
No
Suitable for LSA plus
No
Suitable for RJ plug
No
Suitable for low current connector
Yes
Suitable for ST plug
No
Suitable for SC plug
No
Suitable for SMA plug
No
Suitable for LC plug
No
Suitable for MT-RJ plug
No
With interlock device
Yes
With cutting device
No
With strip function
No
Approvals
North America Certification
UL/CSA certification not required
Specially designed for North America
No
edz files
-
Eaton EMEA Download-Center - download data for this item
-
Eaton EMEA Download-Center