116022 SWD4-8SF2-5
External device plug, SmartWire-DT, at ribbon cable for connection of SWD module
EL-Nummer (Norway)
4519788
External device plug, 8-Pole can be attached at any arbitrary place on the ribbon cable. The functional elements of arbitrarily many SmartWire-DT cards can be attached to the external device plug.
Delivery program
Product range
SmartWire-DT accessories
Basic function
Plug/socket
Basic function accessories
Plug-in connection
Function
For connecting the ribbon cable to SmartWire-DT modules in the control panel
Description
8-pin SmartWire-DT external device plug that can be connected at any point on the ribbon cable.
External device plugs can be used to connect the function elements of any SmartWire-DT module in a control panel.
External device plugs can be used to connect the function elements of any SmartWire-DT module in a control panel.
Connection to SmartWire-DT
yes
For use with
EU5E-SWD…
M22-SWD…
M22-SWD…
Technical data
General
Standards
IEC/EN 61131-2
EN 50178
EN 50178
Dimensions (W x H x D)
15 x 36.5 x 17.5 mm
Weight
0.01 kg
Mounting position
As required
Power loss [P]
0 W
Note on heat dissipation
not relevant
Ambient conditions, mechanical
Protection type (IEC/EN 60529, EN50178, VBG 4)
IP20
Vibrations (IEC/EN 61131-2:2008)Constant amplitude 3,5 mm constant amplitude 0.15 mm max.
8.4 Hz
Vibrations (IEC/EN 61131-2:2008)Constant amplitude 3,5 mm constant amplitude 0.15 mm minim.
5 Hz
Vibrations (IEC/EN 61131-2:2008)Constant acceleration 1 gconstant acceleration 1 g max.
150 Hz
Vibrations (IEC/EN 61131-2:2008)Constant acceleration 1 gconstant acceleration 1 g min.
8.4 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms
9 Impacts
Climatic environmental conditions
Climatic proofing
Dry heat to IEC 60068-2-2
Damp heat as per EN 60068-2-3
Damp heat as per EN 60068-2-3
Air pressure (operation)
795 - 1080 hPa
Ambient temperatureOperation [ϑ]
-25 - +55 °C
Ambient temperatureStorage / Transport [ϑ]
-40 - +70 °C
Ambient temperatureRelative humidityCondensation
Take appropriate measures to prevent condensation
Ambient temperatureRelative humidityRelative humidity, non-condensing (IEC/EN 60068-2-30)
5 - 95 %
Connection options
Connection 1
Socket, 8-pole
Number of insertion cycles
≥ 200
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
0 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 8.0
Programmable logic controllers PLC (EG000024) / Accessories/spare parts for controls (EC002584)
Electric engineering, automation, process control engineering / Display and control component / Panel (HMI) / Panel (HMI, accessories) (ecl@ss10.0.1-27-33-02-92 [AFX005003])
Type of electrical accessory/spare part
Plug
Type of mechanical accessory/spare part
Other
Accessory
Yes
Spare part
No
Approvals
UL File No.
E29184
UL Category Control No.
NKCR
CSA File No.
2324643
CSA Class No.
3211-07
North America Certification
UL listed, CSA certified
Specially designed for North America
No
Dimensions
SWD external device plug
-
(Web)
DWG files
edz files
Step files
-
Line drawing
-
Graphic
-
-
Eaton EMEA Download-Center - download data for this item
-
Eaton EMEA Download-Center