Delivery program

Product range
RMQ16
Basic function
Illuminated pushbutton actuators
Single unit/Complete unit
Single unit
Design
Flat
maintained
Colour
Lens
116C074
Button plate
button plate
red
Button plate
116C074
Blank
Degree of Protection
IP65
Front ring
without bezel
Connection to SmartWire-DT
no
Front dimensions
25 x 25

Technical data

General
Standards
IEC/EN 60947
Lifespan, mechanical [Operations]
> 30 x 106
Operating frequency [Operations/h]
≦ 1800
Actuating force
≦ 4 n
Degree of protection, IEC/EN 60529
IP65
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperatureOpen
-25 - +60 °C
Ambient temperatureEnclosed
- 25 - 40 °C
Mounting position
As required
Mechanical shock resistance
> 40
according to IEC 60068-2-27
Shock duration 11 ms
Sinusoidal g
Terminal capacities
0.5 - 1.0 mm2
Blade terminal
2.8 x 0.8 mm to DIN 46244
Fast-on connectors
2.8 x 0.8 mm to DIN 46247 and IEC 60760
Contacts
Rated impulse withstand voltage [Uimp]
800 V AC
Rated insulation voltage [Ui ]
250 V
Overvoltage category/pollution degree
III/3
Rated operational voltage [Ue]
24 V AC
Control circuit reliabilityat 24 V DC/5 mA [HF ]
< 10-7, < 1 fault in 107 operations Fault probability
Control circuit reliabilityat 5 V DC/1 mA [HF ]
< 5 x 10-6 (1 failure in 5 x 106 operations) Fault probability
Use of insulated ferrule ISH 2,8
>24 V AC/DC recommended
>50 V AC or 120 V DC is mandatory, even on unused blade terminals

Design verification as per IEC/EN 61439

Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
1 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+60 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Front element for push button (EC000221)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Command and alarm device / Front element for push-button actuators (ecl@ss10.0.1-27-37-12-10 [AKF028014])
Colour button
Red
Number of command positions
1
Construction type lens
Square
Hole diameter
16 mm
Width opening
0 mm
Height opening
0 mm
Type of button
Flat
Suitable for illumination
Yes
With protective cover
No
Labelled
No
Switching function latching
Yes
Spring-return
No
With front ring
Yes
Material front ring
Plastic
Colour front ring
Black
Degree of protection (IP), front side
IP65
Degree of protection (NEMA), front side
1

Approvals

Product Standards
IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
UL File No.
E29184
UL Category Control No.
NKCR
CSA File No.
46552
CSA Class No.
3211-03
North America Certification
UL listed, CSA certified
Degree of Protection
UL/CSA Type 1

Dimensions

116X008
Actuating and indicator elements
Square style