General specifications
Product name
Eaton Moeller® series amplifier module
Part no.
ETS4-VS3
EAN
4015080830948
Product Length/Depth
103 millimetre
Product height
83 millimetre
Product width
23 millimetre
Product weight
0.1 kilogram
Certifications
CE marking
IEC/EN 60947
VDE 0660
CSA certified
IEC/EN 60947-4-1
CSA Class No.: 2411-03, 3211-04
UL Category Control No.: NKCR
UL 508
CSA
CSA-C22.2 No. 14-05
CSA file No. 012528
UL Listed
UL
UL File No.: E29184
Product Tradename
None
Product Type
Accessory
Product Sub Type
Amplifier module
Catalog Notes
Contactor coils with rated operational current > 2 A must be actuated via the DILER-G mini contactor relay.
Features & Functions
Fitted with:
LED indication
General information
Accessory/spare part type
Other
Degree of protection
IP20
Lifespan
30,000,000 mechanical Operations (DC operated)
Mounting method
DIN rail
Overvoltage category
III
Pollution degree
2
Rated impulse withstand voltage (Uimp)
6 kV
Used with
DILMF
DILK
DILL
DILMP
DILM
Voltage type
DC
Ambient conditions, mechanical
Mounting position
As required
Shock resistance
10 g, N/O contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 20 ms
Climatic environmental conditions
Ambient operating temperature - min
-25 °C
Ambient operating temperature - max
60 °C
Ambient operating temperature (enclosed) - min
-25 °C
Ambient operating temperature (enclosed) - max
45 °C
Climatic proofing
Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclical, to IEC 60068-2-30
Terminal capacities
Terminal capacity
Only use equal cross-sections.
16 - 14 AWG, solid or stranded
1 x (0.75 - 2.5) mm², flexible with ferrule
2 x (0.75 - 2.5) mm², solid
1 x (0.75 - 2.5) mm², solid
Screw size
M3.5, Terminal screw
Screwdriver size
0.8 x 5.5/1 x 6 mm, Terminal screw, Standard screwdriver
Tightening torque
1.2 Nm, Screw terminals
Electrical rating
Rated actuating current (Ic)
25 mA
Rated operational current (Ie)
2 A
Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V
2 A
Rated operational current (Ie) at AC-15, 380 V, 400 V, 415 V
2 A
Rated operational current (Ie) at DC-13, 220 V, 230 V
0.03 A
Rated insulation voltage (Ui)
440 V AC
Rated operational voltage (Ue) at AC - max
440 V
Conventional thermal current Ith
Conventional thermal current ith of auxiliary contacts (1-pole, open)
6 A
Magnet system
Duty factor
100 %
Coil voltage
24 VDC
Contacts
Control circuit reliability
λ < 1/10⁸ (1 failure at 100,000,000 operations for Uₑ = 24 V DC, Umin = 17 V, Imin = 5.4 mA)
Design verification
Static heat dissipation, non-current-dependent Pvs
0.6 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Technical data ETIM 9.0

Low-voltage industrial components (EG000017) / Accessories/spare parts for low-voltage switch technology (EC002498)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Component for low-voltage switching technology (accessories) (ecl@ss13-27-37-13-92 [AKN570018])
Type of accessory/spare part
Other
Accessory
Yes
Spare part
No